.
Over Coat paste granules ready for spraying, characterized by strong adhesion to the surface and cement. Suitable for spraying on the surfaces of new and old, on ceilings and walls. Using a final layer Decor (granules), used in the mobilization of joints between panels and gypsum used in the treatment plastering uneven.
Special features
- Superior elastic properties, that allows a coat thickness up to 5mm without cracking.
- Excellent filling properties into joints, hairline cracks, and porouses.
- Sprayable; allows taking advantage of time, for a faster plastering job.
- Acrylic properties; excellent adhesion with both under and top surfaces.
- Decorah is applicable to cementious surfaces, gypsum, gypsum boards, wood.
- Odorless when applied.
Application preparation of surface
- Scrape, and remove all plaster particles, dust, and oil.
- Treat holes, and cracks with Acrylic filler.
- Surface must be dry when application.
Priming
- It is recommended to prime the surfaces, especially old surfaces using diluted TPC BOND. Dilute one liter of TPC BOND with 10 liters of clean water.
Application
- Empty the filler into the spraying machine.
- Spray the filler on work areas.
- Render by using a straight, wide blade, in order to level the sprayed coat, and remove excess filler.
- Apply as many coats as needed considering the drying time of coats.
- Sand lightly to get a smooth surface.
* Do not apply if temperature is below 5˚C.
Package and storage
• 25kg. in plastic bag. Must be stored unopened in dry conditions, less than 12 month from the date of production.
• Keep away from direct heat or frost.
Technical data
• Color : Whit
• Filler : Fine graded extenders.
• Special density : 1.39
• Thickness : Up to 5mm per coat.
• Dry to recoat : 3-12hours subject to coat thickness, and temperature.
• Safety : Non-toxic and non-flammable.
• Priming : Diluted TPC BOND
|
