OvrCot paste used for the purposes of creating concrete interior surfaces for final finishing.

Special features
-    Superior elastic properties, that allows a coat thickness up to 5mm without cracking.
-    Excellent filling properties into joints, hairline cracks, and porouses.
-    Sprayable; allows taking advantage of time, for a faster plastering job.
-    Acrylic properties; excellent adhesion with both under and top surfaces.
-    Decorah is applicable to cementious surfaces, gypsum, gypsum boards, wood.
-    Odorless when applied.
Application preparation of surface
-    Scrape, and remove all plaster particles, dust, and oil.
-    Treat holes, and cracks with Acrylic filler.
-    Surface must be dry when application.
Priming
-    It is recommended to prime the surfaces, especially old surfaces using diluted       TPC BOND. Dilute one liter of TPC BOND with 10 liters of clean water.
Application
-    Empty the filler into the spraying machine.
-    Spray the filler on work areas.
-    Render by using a straight, wide blade, in order to level the sprayed coat, and remove excess filler.
-    Apply as many coats as needed considering the drying time of coats.
-    Sand lightly to get a smooth surface.
* Do not apply if temperature is below 5˚C.
Package and storage
•    25kg. in plastic bag. Must be stored unopened in dry conditions, less than 12 month from the date of production.
•    Keep away from direct heat or frost.
Technical data
•    Color                     : Whit  
•    Filler                      : Fine graded extenders.  
•    Special density    : 1.39
•    Thickness            : Up to 5mm per coat.
•    Dry to recoat        : 3-12hours subject to coat thickness, and temperature.
•    Safety                    : Non-toxic and non-flammable.